A compact hip-mounted 360° camera mount. Exceptional stability with minimal pole swing and quick angle adjustment while riding.
The CreatorLite
Captured with CreatorLite across land, air, and water — close to the athlete, inside the movement, and far beyond the usual outside view.
BUILT TO LAST
Professional camera mounts for demanding use. Wingman Creator carries forward the same philosophy behind our Wingman foiling gear: build high-quality products that last, make them repairable, and support them long after the purchase.
Built for professional use
Carbon, CURV® composite, stainless steel, MJF 3D-printed parts and saltwater-resistant components - selected for demanding use, high loads and long service life.
Camera security by design
A broken mount can mean more than a broken part - it can mean a lost camera and lost footage. That’s why camera security is built into the system from the start, helping reduce the risk of losing another camera when things go wrong.
Internal camera leash
All carbon poles used across CreatorPro, CreatorLite and CreatorMark feature an internal Dyneema leash. In a worst-case scenario, if a pole section breaks or separates under extreme load, the leash helps keep the camera connected to the main system - and your camera and footage with you.
Important: The leash must always be correctly attached to the camera or, where required, to the camera adapter.st.
Spare parts available
We build products to last. And if something does break, you shouldn’t have to replace the whole system. We keep spare parts available for replaceable components, so damaged parts can be repaired or replaced and the rest stays in use.
LIFETIME SUPPORT
Crashed it? We’ll help you keep it going. Repair is always our first option. With spare parts and long-term service, we aim to keep your Wingman gear in use for as long as possible.
Key Features
Heavy-Duty Pivot Joint
Swing the VarioPole through a semi-spherical range and lock your camera angle in seconds - no tools needed for adjustment. When worn on the hip, the pivot remains directly accessible during use.
Configurations & Setup
Choose the stabilization level that fits your session: full support with Mount + Stabilizer + Elastic Belt, solid support with Mount + Stabilizer, or a reduced Mount Only setup for low-impact use.
• Mount + Stabilizer + Elastic Waist Belt - Maximum stabilization for high-impact use, pumping, hard landings, and rough conditions
• Mount + Stabilizer - Solid support when the Elastic Waist Belt is not needed or when worn under additional gear like an impact vest
• Mount Only - Reduced setup for low-impact use where minimal stabilization is sufficient
All configurations can be worn on the left or right side, thanks to the symmetric mount design. You can also position CreatorLite on the front or back of your body when you want a different camera angle.
VARIOPOLE SYSTEM
Meet the VarioPole 140.
The VarioPole 140 is a three-section telescopic carbon pole designed for use with CreatorLite and CreatorPro.
Its extended reach creates more distance between the camera and the rider, helping to produce a wider, less distorted third-person view with a drone-style perspective. The three-section construction keeps the pole compact at its minimum length while providing a maximum extended pole length of 140 cm.
The VarioPole 140 can also be used handheld as a lightweight carbon selfie stick for 360° cameras and action cameras, making it a versatile tool both on and off the mount system.
Two aluminium twist-lock clamps allow the telescopic sections to be released, adjusted, and securely locked at the desired length. At the top of the pole, a stainless steel 1/4"-20 insert provides a strong standard camera connection and can also be used with GoPro-style finger mount adapters for compatible 360° cameras and action cameras.
The lower section is reinforced with aluminium where the pivot joint locks onto the pole.
Inside the pole system, an integrated Dyneema safety leash provides a worst-case backup for the camera setup. If a connection opens or a component breaks under heavy load, the camera remains connected to the mount system.
Specifications
- Telescopic carbon pole
- Three-section construction
- Maximum extended length: 140 cm
- Minimum length: 58 cm
- Weight: 195 g
- Aluminium-reinforced lower section
- Two aluminium twist-lock clamps
- Integrated internal Dyneema safety leash
- Stainless steel 1/4"-20 camera connection
- Compatible with GoPro-style finger mount adapters
- Compatible with CreatorLite and CreatorPro
What's in the box?
• CreatorLite mount
• Stabilizer
• Elastic waist belt
• Adjustable safety webbing
• Heavy-duty Pivot Joint
• VarioPole 140 with integrated Dyneema safety leash
The Complete CreatorLite Guide
Setup, features, camera settings and practical use—all covered in one video.
Start Creating Now!
FAQ - CreatorLite
A: CreatorLite is a modular, low-mounted wearable 360° camera mount for riders who want maximum versatility and easy access while moving.
It can be worn on the back, either hip or the front. The included VarioPole 140 creates a wide third-person perspective, while the heavy-duty Pivot Joint lets you swing and reposition the pole around the body.
The detachable stabilizer and elastic waist belt let you adapt the level of support to the session — from maximum stability to a reduced setup for lower-impact use.
A: CreatorLite is the more universal wearable mount when you want maximum versatility and easy access while riding. If you like running the pole on your hip/side and want to adjust or shift the pole position on the fly without taking the system off, CreatorLite is the right choice. Because it’s modular, you can also strip it down depending on the session - detach the stabilizer and/or the elastic waist belt to keep the setup lighter and simpler for smooth, low-impact use. CreatorPro is the choice when you want the most heavy-duty, locked-in back setup especially for hard action and for wearing it under a waist harness.
A: Compared with other waist-mount systems on the market, CreatorLite is designed to be significantly more stable because you can actively build stability into the setup: with the detachable stabilizer and detachable elastic belt, the system locks in around your waist instead of relying on a simple strap mount. Some other “waist” solutions are actually screw-on mounts that require drilling or making holes in a windsurf/kite harness and bolting hardware through the harness - a different approach that can permanently damage the harness.
A key stability concept with CreatorLite is running the pole in a 90° orientation relative to the body instead of sticking straight out from the pole base. That creates a stiff, supportive U-shape around your waist (with a very rigid curved structure), which dramatically increases pole stability under load.
Practical positioning examples:
• Side view: wear it on your back and run the pole 90° out to the left or right.
• Front/back view: wear it on your hip, again using a 90° pole orientation for maximum stability.
A: Yes. CreatorLite is designed to be very comfortable: it uses 6 mm neoprene padding on the inside and is flexible enough to follow your body while staying stiff where it needs to be for stability. Depending on where you wear it (back, hip, front), you can always find the setup that feels best. The stabilizer and elastic belt are also designed for comfort and include padding. Because CreatorLite is modular, you can adapt it to the session: use stabilizer + elastic waist belt for maximum stability, detach the elastic belt and run stabilizer-only, or detach the stabilizer and run it as the minimal waist-harness style mount.
A: CreatorLite does not replace a harness. It’s a wearable camera mount — not a riding harness. Compatibility depends on the harness type and hook position: it’s not usable with a standard waist harness worn in the same waist position, because CreatorLite sits there and you can’t stack it over a waist harness. It can work with harness setups where the hook sits high enough that CreatorLite can sit below the hook on your waist. With Wingman harnesses like the Wingman Bundle and the Wingman SL, this setup can work very well, especially when run with a higher hook position. It can also work with other harness types, for example chest harnesses, depending on hook height and whether there’s enough space to fit the camera mount underneath.
A: CreatorLite includes:
• CreatorLite mount
• Stabilizer
• Elastic waist belt
• Adjustable safety webbing with two buckles
• Heavy-duty Pivot Joint
• VarioPole 140 with integrated Dyneema safety leash
Camera not included.