Capture front and rear perspectives in one setup. Built to stay stable when it matters most.
The CreatorPro
Capture the session. As close as you can get to the action.
BUILT TO LAST
Professional camera mounts for demanding use. Wingman Creator carries forward the same philosophy behind our Wingman foiling gear: build high-quality products that last, make them repairable, and support them long after the purchase.
Built for professional use
Carbon, CURV® composite, stainless steel, MJF 3D-printed parts and saltwater-resistant components — selected for demanding use, high loads and long service life.
Camera security by design
A broken mount can mean more than a broken part — it can mean a lost camera and lost footage. That’s why camera security is built into the system from the start, helping reduce the risk of losing another camera when things go wrong.
Internal camera leash
All carbon poles used across CreatorPro, CreatorLite and CreatorMark feature an internal Dyneema leash. In a worst-case scenario, if a pole section breaks or separates under extreme load, the leash helps keep the camera connected to the main system — and your camera and footage with you.
Important: The leash must always be correctly attached to the camera or, where required, to the camera adapter.
Spare parts available
We build products to last. And if something does break, you shouldn’t have to replace the whole system. We keep spare parts available for replaceable components, so damaged parts can be repaired or replaced and the rest stays in use.
LIFETIME SUPPORT
Crashed it? We’ll help you keep it going. Repair is always our first option. With spare parts and long-term service, we aim to keep your Wingman gear in use for as long as possible.
Key Features
Add Your Second Angle
The CreatorPro front camera mounting platform accepts an action camera or 360° camera, so you can capture close rider shots and rear third-person footage in the same session.
Heavy-Duty Pivot Joint
Position your camera anywhere within a semi-sphere and lock the angle in seconds - no tools needed for adjustment. Built for extreme stability, it keeps your setup exactly where you set it, even in heavy action.
Adapts to your harness
The pole base can be mounted in two different positions to adapt the setup to different needs. When used with waist harnesses, the upper position usually provides more clearance and a cleaner overall fit.
Two Mounting Options
Low for a compact setup, high to clear a harness - always stable and locked in.
VARIOPOLE SYSTEM
Meet the VarioPole 140.
The VarioPole 140 is a three-section telescopic carbon pole designed for use with CreatorLite and CreatorPro.
Its extended reach creates more distance between the camera and the rider, helping to produce a wider, less distorted third-person view with a drone-style perspective. The three-section construction keeps the pole compact at its minimum length while providing a maximum extended pole length of 140 cm.
The VarioPole 140 can also be used handheld as a lightweight carbon selfie stick for 360° cameras and action cameras, making it a versatile tool both on and off the mount system.
Two aluminium twist-lock clamps allow the telescopic sections to be released, adjusted, and securely locked at the desired length. At the top of the pole, a stainless steel 1/4"-20 insert provides a strong standard camera connection and can also be used with GoPro-style finger mount adapters for compatible 360° cameras and action cameras.
The lower section is reinforced with aluminium where the pivot joint locks onto the pole.
Inside the pole system, an integrated Dyneema safety leash provides a worst-case backup for the camera setup. If a connection opens or a component breaks under heavy load, the camera remains connected to the mount system.
Specifications
- Telescopic carbon pole
- Three-section construction
- Maximum extended length: 140 cm
- Minimum length: 58 cm
- Weight: 195 g
- Aluminium-reinforced lower section
- Two aluminium twist-lock clamps
- Integrated internal Dyneema safety leash
- Stainless steel 1/4"-20 camera connection
- Compatible with GoPro-style finger mount adapters
- Compatible with CreatorLite and CreatorPro
What's in the box?
• CreatorPro mount
• Front camera mounting platform
• Elastic waist belt
• Heavy-duty Pivot Joint
• VarioPole 140 with integrated Dyneema safety leash
Start Creating Now!
FAQ - CreatorPro
A: CreatorPro is the most stable, heavy-duty wearable mount in the lineup. It’s a stable back mount (positioned between a waist mount and a shoulder mount) designed for multi-sport use wherever you want maximum stability and impact resistance. It’s specifically designed to be worn under a waist harness (windsurf/kite) for a super stable setup. It supports long poles while staying controlled, offers two camera positions for front and rear perspectives, and the pole mount can be positioned in two mounting heights (low and high).
A: Because the construction holds the pole position extremely firmly on the body, so the pole stays controlled instead of swinging around. This stability is what makes longer poles usable in real action. For maximum stability, wear it snug - and when worn under a waist harness, the setup becomes even more stable.
A: Yes. CreatorPro is designed to be comfortable, and you can dial in the fit depending on what you’re doing: wear it snug for filming (maximum stability), then relax or adjust the setup between runs. In real use, wearable camera mounts are usually used in focused shooting blocks during the day - capture your clips, adjust perspective, and go again.
A: Any wearable system adds something to your body, but CreatorPro is designed to interfere as little as possible. The goal is the best compromise of comfort, stability, and freedom of movement across multi-sport use.
A: Yes. You can wear it over a wetsuit, impact vest, or jacket. It’s size-adjustable with a large fit range - and it’s also designed to be worn under a waist harness.
A: You can wear it underneath a waist harness. You can also wear clothing over it (for example a T-shirt or jacket) and create a small opening at the back so only the pole connection area sticks out - useful when you want the mount to be as visually discreet as possible for high-end productions. Terminology: pole base (mounted on the harness), pivot joint (aims in all directions), then the pole.
A: Yes - it works with a waist harness. We tested it with the Wingman Bundle harness. Depending on how high/low you run your hook, the front plate can sit above or below the hook and works great. Creator Pro is not designed to mount a hook onto it - the practical setup is CreatorPro plus a waist harness with hook height/position adjusted accordingly. This also means you don’t need screw-on harness camera mounts, and you don’t have to drill holes into your harness to add a camera system.
A: CreatorPro includes:
• CreatorPro mount
• Front camera mounting platform
• Elastic waist belt
• Heavy-duty Pivot Joint
• VarioPole 140 with integrated Dyneema safety leash